Driveshaft nut tightening torque

[red astra]

Hi there, 

Can anyone tell me the tightening torque for the driveshaft nut on an astra j hatchback 1.6 P10. 

Have a torque wrench that goes up to 210nm but fear this is not enough and I may have to buy another which could be costly and would only be used once. Is there any method to avoid this. Don't know anyone that has one. 

[AndyR]

Hi there Red Astra, I have just been online and found that you need to set it to 250Nm, or 185 ft.-lbs. 

I did my wifes Peugeot last year, and as my torque wrench didn't go high enough, I nipped it up as tight as the air gun would go, and then rolled down to my local tyre garage and got them to check for me. Luckily I was spot on.  Hope this is helpful.